• All products are added to your cart.

Zero Pump Co2 Quick Head Pro

1 / 1
This CO2 nozzle head is a quick and lightweight alternative to using a hand pump for repairing flat bike inner tubes whilst out riding.
Ordered before 10AM (AEST), delivered tomorrow! You got: 03:39 hours
Zero Pump Co2 Quick Head Pro

Editor's Note


For the quickest and lightest bike pump system, look no further than the Zero Pump CO2 Quick Head Pro. This spring loaded nozzle head is compatible with both presta and shrader valves and features a foam sleeve to ensure your fingers don't stick to the freezing CO2 canister. It is as simple as
  1. Screw in the included CO2 canister up into the nozzle head until the seal is cracked,
  2. Firmly push the nozzle head over your inner tube valve (but not as far as depressing the spring head yet)
  3. Once securely on the valve, push the unit further down again over the valve fully depressing the spring head allowing CO2 to enter your tube inflating it
  4. Once tube is fully inflated, remove nozzle head from your inner tube valve
  5. Screw in presta valve core or replace schrader valve cap
  6. Replace CO2 canister in your spares kit


  • Foam sleeve to prevent fingers sticking to freezing CO2 canister


Compatibility  Presta and Schrader valves