• All products are added to your cart.

Focus 2022 Jam2 6.7 Bosch

$7,199.00
MORE MOUNTAINS, MORE TRAILS, MORE TO EXPERIENCE. The JAM² is positioned between FOCUS'S e-enduro SAM² and the THRON². 150 mm suspension travel make the JAM² ready to go everywhere.
Ordered before 10AM (AEST), delivered tomorrow! You got: 03:39 hours
Focus 2022 Jam2 6.7 Bosch

CONQUERS NEW MOUNTAINS

  • SUPER POWERFUL AND DYNAMIC E-MOTOR

    The efficient Bosch Performance CX e-drive (Gen. 4) supports your ride up to 25 km/h with powerful 85 Nm. The strongest e-motor of Bosch is perfectly integrated, the JAM² rides agile and nimble. In eMTB mode, the motor support adjusts automatically to your riding power. The Bosch Powertube battery is perfectly integrated into the down tube, yet it can also be removed at any time for charging. For sure, you can also charge it directly on the bike. Thanks to 625 Wh battery capacity, you can ride all your trails again and again.

  • SMOOTH RIDING, BUT CUSTOMISABLE

    29" wheels offer an impressively smooth ride and will appeal to both riders experienced and beginner. But you have the option to switch to a different wheel size thanks to the FLIP CHIP. There are two possible axle positions at the dropout: the “low position” is optimised for 27+ tyres, and the “high position” is ideally suited for 29" wheels. Your e-MTB’s suspension fork can accommodate both wheel dimensions, so you can ride your bike with 29", 27+ or as a Drifter (29"/27+). The post mount adapter for the conversion is, of course, included as part of the purchase.

  • OPTIMAL SUSPENSION PERFORMANCE IN ANY SITUATION

    Our F.O.L.D. chassis has been specially designed to meet the increased demands placed on e-MTBs. This means that we can also guarantee the perfect mix for the e-All-Mountain JAM²: F.O.L.D. is extremely sensitive while being progressive enough to prevent a harsh bottom out.

TECHNOLOGY

You have the option to switch to a different wheel size thanks to the FOCUS FLIP CHIP. There are two possible axle positions at the dropout: the “low position” is optimised for 27+ tyres, and the “high position” is ideally suited for 29" wheels. Your e-MTB’s suspension fork can accommodate both wheel dimensions, so you can ride your bike with 29", 27+ or as a Drifter (29"/27+). The post mount adapter for the conversion is, of course, included as part of the purchase. For sure, you have to adjust the dimensions of the wheels in the e-drive settings and you might have to change some parts.
 

SUSPENSION

SAG is the amount of way the shock compresses when you just sit on your bike without moving. You adjust it with the pressure you pump in your shock with a shock pump. Our SAG recommendation is 30%. To see the actual percentage, you use the O-Ring that is placed on the fork and shock. For detailed set-up recommendations for your shock, see this chart: JAM² models
 
 

Reviews